Low kW Axial Fan
- Quiet operation.
- Corrosion resistant aluminum.
-
1
-
2
Fan Drive System
Premium quality belts. Corrosion resistant sheaves. Heavy-duty bearings. Adapted fan motor for operation in saturated conditions. -
3
Water Distribution System
- Visible and accessible during operation.
- Overlapping spray patterns ensure proper water coverage.
- Large orifice, non-clog nozzles.
-
4
Coil (Not Shown)
Available in either hot-dip galvanised steel or stainless steel. Designed in accordance with AS2971 and manufactured within an ISO:9001 certified Quality Assurance Program. Each coil is pressure tested to 2750 kPa after fabrication.
-
5
Heavy-Duty Construction
ZAM coated steel panels. -
6
Combined Inlet Shields
- Corrosion resistant.
- Easily removable.
- UV resistant plastic material.
-
7
Hinged Access Doors
- Inward swinging door.
-
8
Recirculating Spray Water Pump
- Close coupled, bronze fitted centrifugal pump.
- Totally enclosed fan cooled (TEFC) motor.
- Bleed line with metering valve installed from pump descharged to overflow.
-
9
Cold Water Basin
- Sloped cold water basin for easy cleaning.
- Suction strainer with anti-vortex hood.
- Adjustable water make-up assembly from air inlet side.
- Integral internal walkways as standard.
-
10
BACross Drift Eliminators
- Plastic material.
- Impervious to rot, decay and biological attack.
- Designed and manufactured by BAC.
Series 1500 FXV
Closed Circuit Cooling Towers
Key Features
- Combined Flow Technology
- Multiple Fan Construction
- Full Internal Access
Key Benefits
- Reduced Energy Consumption
- Easy Access for Maintenance
- Low Noise Design
Characteristics
Combined Flow, Axial Fan, Induced Draft
Key Features
Combined Flow Technology
BAC’s range of combined flow units, utilise the best in both worlds. By cooling through direct evaporation onto the coil surface as well as through a fill material, before being recirculated back to the sprays.
Multiple Fan Construction
Multiple fans provide redundancy as well as energy efficiency when working on VSD based controls.
Full Internal Access
Open internal area provided for ease of access to all components within the unit for maintenance.
Key Benefits
Reduced Energy Consumption
High efficiency electrical equipment options as standard provide for a high level of energy efficiency for kW of heat rejected compared to other products.
Easy Access for Maintenance
Special ergonomic considerations taken into account during the units design makes for ease of access for maintenance. This in turn allows for reduced costs during servicing from both mechanic’s time and unit “down time”.
Low Noise Design
Consideration taken for fan type, location and air flow requirements help to improve the noise output of these products.
Principle of Operation
The FXV-D combines the function of a cooling tower and a heat exchanger into one unit. The warm process fluid (1) circulates on both sides of the tower through a heat exchanger coil (2), which is wetted by a spray system (3). In parallel with the water spray flow, anaxial fan (4) draws air (5) over the coil. The evaporation process cools the fluid (6) inside the coils. Because the coldest spray water and air are in the top of the tower, the process fluid travels from the bottom to the top of the coils. The spray water falls onto a fill pack (7) where it is cooled before falling into the water basin (8). Spray pumps (9) recirculate the cooled water to the top of the tower. The warm saturated air (10) leaves the tower through the drift eliminators (11) which remove water droplets from the air.
Resources
For any further information on this product range please feel free to contact us at the link below, or feel free to visit our International Resource Library.
